Sculpfun S30 Pro Max
- Sculpfun S30 Pro Max $ 929.00
- Sculpfun S30 Pro Max $929.00
- xTool D1 Pro $699.99
- ATOMSTACK X20 PRO $1,099.99
The best SCULPFUN S30 Pro Max 20W Laser Cutter To be exact, that is the fourth model to launch a 20W diode laser engraver. Let’s undergo the timeline: the primary is the Atomstack X20 Pro, the second is xTool D1 Pro, the third is the Atezr P20 Plus, and the fourth is the SCULPFUN S30 Pro Max. We’ve already coated the primary three, so now I’ll give attention to the brand new 20W Laser.
Video of Sculpfun S30 Pro Max
The Sculpfun S30 Pro Max has inherited the body design of its predecessor, the SCULPFUN S10. However, the body colour has been modified from mild to dark blue.
The similar body is supplied with three different energy laser modules: 5W single laser module corresponds to the dummy SCULPFUN S30, 10W twin laser module to the mannequin SCULPFUN S30 Pro, and 20W four laser modules are the very best configuration, referred to as SCULPFUN S30 Pro Max.
I bear in mind very clearly that Atomstack geared up their flagship mannequin X20 Pro with air help and an air pump, which was obtained adequately by prospects. This could have set a pattern, and I felt at the time that different manufacturers would positively comply with this technique later.
Now we see an analogous air help system on the SCULPFUN S30 Pro Max, which permits the engraver to blow away smoke and dirt whereas engraving or chopping, reducing the floor temperature of the fabric and getting lovely work.
Many prospects suggested that it doesn’t matter what model the lens of the laser module has the opportunity of breakage. This is a result of the lens could have particles connected to it, and when the Laser passes via the lens, the particles make the Laser refracted or diffusely mirrored.
The temperature is just too excessive to make the lens break. But don’t worry, SCULPFUN within the new bundle, geared up with a replaceable lens, remedy the buyer’s worries.
It is price mentioning that this time SCULPFUN geared up two variations of extension equipment for their S30 collection. The unique engraving space is about 400*400mm.
You should purchase the Y-axis extension equipment to increase the engraving space to 935x400mm; buy the XY-axis extension equipment to improve the utmost engraving space of 935x905mm, which can assist you higher deal with massive space engraving or chopping work.
Automatically Controlled Air Assist System: The S30 collection is supplied with an air-assist 32-bit motherboard and a control-type air pump, which may intelligently manage the air-assist swap throughout engraving via the Light Burn software program M8 button. This makes the engraving and chopping very clear and may be appropriate for manufacturing beautiful items.
High-Pressure Air Assist Nozzle: S30 collection is supplied with a complicated high-pressure air-assisted metallic nozzle, which may generate 30L/min high-pressure airflow beneath the air pump, tremendously bettering the chopping effectivity, and the chopping velocity is more significant than five occasions sooner than that without air help.
Ultra-thin 20W Laser: Adopting ultra-thin laser shaping know-how, the laser focus of the S30 collection is as skinny as hairs and highly effective for engraving or chopping. The S30 Pro Max 20W pursues the final word chopping velocity, appropriate for professionals, outlets, or factories.
Product Details For This 3D Printer
Item Name: Sculpfun S30 Pro Max
Model: S30 Pro Max
Type: Laser Engravers
High-Pressure Air Assist Nozzle
Ultra-thin 20W Laser
Replaceable Protective Lens
Expandable Engraving Area
Right-angle Measuring Ruler
Sturdy and Durable Aluminum Alloy Frame
Industrial-grade Cutting Accuracy
Upgraded 32-bit Air-assist Motherboard
Diode Laser Output Power: 20W (note: that this is light energy, not electrical energy)
Laser Focus: 0.08x0.1mm
Laser Wavelength: 455±5nm
Focusing Method: fixed focus column + sliding device
Laser Protection Cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles
Engraving Accuracy: 0.005mm
Engraving Area Size: the standard version is 410*400mm, which can be expanded to 935x400mm or 935x905mm
Machine Power: about 60W
Type: mainboard-controlled air pump
Air Hose Inner Diameter: 7.5mm
Operating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system
Supported File Formats: NC, BMP, JPG, PNG, DXF, and other image formats
Data Transmission Method: USB connection or Bluetooth wireless connection
Power Input: 100-240V AC, 50/60HZ
Power Output: 24V 5A
|Dimensions & Weight
Product Weight: 7kg
Package Weight: 15kg
Product Size(L x W x H): 230*235*625mm
Package Size(L x W x H): 260*500*650mm
1 x S30 Pro Max Laser Engraver
1 x Laser Repair Kit
1 x 12V Automatic Air Pump
3 x A4 Size 3mm Wooden Board
2 x Limit Switch
1 x 12V 5A Power Adapter
1 x Power Cord
1 x USB Cable
1 x Air Tube
1 x Installation Tool Kit
1 x Laser Goggles
1 x A4 Metal Backing Plate
Step 1-6 Install the Package
1 x X-axis Assembly
2 x X Profiles
2 x Y Profiles
1 x Control Box Assembly
3 x Support Feet
1 x User Manual