xTool D1 Pro
- xTool D1 Pro $699.99
- xTool D1 Pro $759.99
- xTool D1 Pro $1,199.99
- xTool D1 Pro $669.99
- xTool D1 Pro $1020.46
Are you looking to add an intimate contact to items but don’t know how to do it? Maybe you wish to add personalization to your enterprise? Why do you not get the xTool D1 Pro Higher Accuracy Diode DIY Laser Engraving & Cutting Machine?
The xTool D1 Pro 20W laser cutter and engraver has the world’s most robust 20W diode laser. It cuts 12mm of wooden or 8mm of black acrylic in ONE PASS. This means you can rapidly hammer out more significant tasks.
The XTool D1 Pro is a laser engraving machine within the higher value vary. But for a matter of just below $699.99, you also get a lot rather than provide.
Made of aluminum alloy and metal, xTool D1 Pro has a sturdy structural design that may face up to a 200 LB grownup’s weights on it, confirmed stability, and excessive accuracy(0.004 inches) even working on the highest pace.
Built with Industrial grade sturdy design, xTool D1 Pro has a three X longer lifetime than bizarre laser chopping machines. Adjust focus in three seconds with focal size setting bar. Four restrict switches are put in on xTool D1 Pro to find the laser head and alet you the four boundaries if the laser head is about to hit them.
Easy to start DIY with the xTool Creative Space software program. Designed for starters, XCS has FREE pattern tasks, design supplies, fonts, and default parameters for generally used stores. xTool D1 Pro can be suitable with Lightburn for extra superior capabilities.
The 430 x 390 mm laser engraver is provided with a 20-watt laser diode that cuts wooden as much as 10 mm and acrylic as much as eight mm thick. To obtain the 20-watt energy, the XTool D1 Pro bundles a complete of 4 5-watt lasers.
The positive 0.08 x 0.10 mm laser level shouldn’t be solely appropriate for chopping but additionally for engraving. A strong aluminum body offers the laser engraver its stability. The linearly guided laser strikes over the engraving floor at as much as 400 mm/s.
The result’s an exact engraving with an excessive stage of element. The focus could be adjusted within the 50 mm vary. The laser peak is adjusted by way of a quick-release fastener.
There are additionally sufficient security precautions with this laser engraver. A canopy prevents the laser beam from escaping. Vibrations throughout the operation are detected and trigger the laser to change off robotically.
Smoke that’s produced could be extracted utilizing an optionally out there extraction system. On the software program facet, you will have the selection between the in-house xTool Creative Space or the well-known LightBurn.
The benefit of xTool Creative Space is that the laser engraver will also be managed wirelessly by WLAN. But this system has much more to supply. Print templates could be collected, edited, and processed.
Other connection choices embrace USB and SD reminiscence playing cards. The file codecs SVG/DXF/JPG/JPEG/PNG/BMP/TIF/CR2 are acknowledged.
Pros and Cons of xTool D1 Pro
- Metal Grey 20W
- 10mm Basswood Cuts
- Up to 400mm/s Working
- Speed to Increase Your Productivity
- Finer Details by Ultra-fine Compression Spot
- Higher Accuracy
- Not good cutting without air assist
- You can use xTool Enclosure for safety.
With a flame and acceleration sensor, xTool D1 Pro will cease processing robotically if the machine detects flames or transfers/tipping. For extra particulars, go to on official Website.
Product Details For This 3D Printer
●Item Name: xTool D1 Pro
●Model: D1 Pro
●Type: Laser Engravers
●High Accuracy Cutting &amp;amp; Engraving
●0.08mm*0.06mm ultra-fine compression spot
●Industrial Grade ALL-STEEL Wheel &amp;amp; Shaft
●Made of aluminum alloy and steel
●Super powerful laser beam oxidizes
●Adjust focus in 3 seconds
●Equipped with flame sensor
●Tension Wheel &amp;amp; Synchronous Belt
●Machine Power: 90W
●Laser Module Output Power: 20W
●Laser Spot: 0.08 mm
●Wavelength: 450 - 460 mm
●Routing Speed: 160 mm/s
●Working Area: 432*406 mm
●Max. Workpiece Height: 50 mm
●Voltage Input: 100-240V 50-60HZ
●Voltage Output: 12V 7A 84W
●Connecting Interfaces: Wi-Fi, USB, Offline Use
●Certification: FCC, FDA
●Operating Systems: Windows, macOS, Android, iOS
●Control Software: Laserbox Software, Laserbox App
|Dimensions & Weight
●One Package Weight: 8.50kgs / 18.75lb
●Carton Weight: 22.00kgs / 48.50lb
●Carton Size: 84cm * 42cm * 32cm
/ 33.07inch * 16.54inch * 12.6inch
●Loading Container: 20GP: 236 cartons * 2 pcs = 472 pcs
●40HQ: 548 cartons * 2 pcs = 1096 pcs
●1 x xTool D1 Pro 10W Machine
●8 x Raisers
●1 x RA1 Rotary Roller