Firmware for HK1 RBOX W2 TV Box With Amlogic (07-22-2022)

SHARIF December 19, 2022Last Updated: December 19, 2022

0 1 minute read

Firmware for HK1 RBOX W2 TV Box (07-22-2022) , which integrates Amlogic S905W2 processor manufactured at 12nm soldered on board. This chip is a Quad Core with an ARM Cortex-A35 processor and a MALI-G3 MP2 GPU.

Firmware for HK1 RBOX W2 TV Box

This processor consists of Android 11, 2/4 GB DDR3 RAM and 16/32/65 GB eMMc storage memory adequate for switchboard variations.

Firmware for HK1 RBOX W2

There could also be a twin-band WiFi AC with an inside antenna and Bluetooth 4.1. Inside the connector half, spherical its spherical topic, we now have 2 USB 2.0 ports, HDMI 2.1 port, RJ-45 10/100 group connector and a reset button.

The Android Area HK1 RBOX W2 might be purchased on AliExpress for $39, with transport included.

Specification

CPU	Amlogic S905W2 64-bit quad core ARM®Cortex™A35 CPU
GPUs	G31™MP2 GPU processor
Memory	DDR3: 2G/4GB
Flash	EMMC : 16G/32GB/64GB
Wifi	IEEE 802.11 b/g/n; 2.4G / 5G
Bluetooth	BT; Support voice remote control
modeling	Plastic: Black Color
/EITHER	1*HDMI	HDMI 2.1, HDMI CEC Compliant, Dynamic HDR and 8K x 4K@24 Full Resolution Output
	2*USB	2*USB2.0
	1 * IR Receiver	Remote Reciver Connect
	1*RJ45	The ethernet interface; Support 10/100M
	1*TF card	4GB/8GB/16GB/32GB/64GB
Can	DC 5V/2A ;
Software
YOU	Android 11.0